JAKEMY 145-in-1 Precision Screwdriver Set Review — 2026

Anyone who's tried to open a modern smartphone, laptop, or gaming console quickly learns that standard screwdrivers are useless. The screws are tiny, specialized, and often proprietary. A precision screwdriver kit is a prerequisite for DIY electronics repair — and the JAKEMY 145-in-1 is one of the most comprehensive options available at this price point.

This review covers everything you need to know about the JAKEMY 145 in 1 Precision Magnetic Screwdriver Set with Hex Bits: bit quality, magnetic performance, build, and how it compares to the iFixit Pro Tech Toolkit and ORIA screwdriver set. If you do any electronics work — phones, laptops, consoles, hobby assembly, camera repair — read on.

What's in the Box

The JAKEMY 145-in-1 set includes 145 pieces total, though the breakdown is worth understanding:

• 1 precision handle with a rotating cap and comfortable grip
• 1 extension bar for reaching recessed screws
• 2 bits holders for organizing bits during use
• 141 precision bits across Phillips, flathead, Torx, Hex (Allen), Pentalobe, Tri-wing, Y-type, TS (Tamper-resistant Security), and more

The bit variety is genuinely impressive. The Pentalobe bits (P2, P5, P6) cover iPhone models going back several generations. The Torx range covers T2 through T40. The security Torx bits (with the center pin hole) cover tamper-resistant applications in laptops and gaming hardware. The Tri-wing and Y-type bits cover Nintendo hardware — Game Boy, DS, Switch cartridges, and Joy-Con controllers.

The carry case is a clamshell design with a molded plastic insert holding each bit in its own slot. Everything is labeled, which matters more than you might think when you're hunting for a T3 in a 145-piece kit at midnight.

Bit Quality and Materials

The bits are made from Chrome Vanadium (CRV) steel, which is the standard material for quality hand tools. CRV offers a good balance of hardness (resists wear on the bit tip) and toughness (resists snapping under torque). The alternative at lower price points is carbon steel, which dulls faster and is more prone to stripping — so CRV is the right call here.

Magnetic Tips

All bits in the JAKEMY set have magnetic tips. This is essential for precision electronics work — tiny M1.5 and M2 screws are nearly impossible to position by hand without magnetism. The magnetic strength is adequate: bits hold small screws reliably but don't require excessive force to separate when you're done.

A common concern with magnetic tools near electronics: will the magnetism damage components? The short answer is no, for most consumer electronics. The fields are too weak and localized to affect SSDs, motherboards, or screens. The only exception is working directly on hard drives with spinning platters (HDDs), where you should minimize magnet proximity — but in 2026, most people have SSDs anyway.

Bit Fit and Torque

Bit fit quality is the most important practical variable in a precision set. A bit that wobbles in a screw head strips the screw; a bit that fits snugly lets you apply full torque. The JAKEMY bits fit well in common screw types (Phillips, Torx, Hex). For the more specialized types (Tri-wing, Y-type), fit is adequate — not quite as tight as iFixit's premium bits, but good enough for the occasional Nintendo repair.

The handle provides about 12 N·cm of torque with normal hand pressure — enough for electronics, where over-tightening is a more common problem than under-tightening.

The Handle: Rotating Cap Design

The JAKEMY handle uses a rotating cap at the top — you press down with your index finger on the cap while your thumb and fingers grip and rotate the barrel. This design is the standard for precision screwdriver handles and works well for controlled, low-torque applications. It's significantly more ergonomic than using a standard screwdriver handle for small screws.

The grip is rubberized with a knurled texture, which helps prevent slipping when your hands are dry. It won't win comfort awards after hours of sustained use (the grip diameter is narrow), but for intermittent repair tasks it's perfectly fine.

The extension bar is useful for reaching screws in deep recesses — common in laptop chassis work where the screw well is 10–15mm deep.

Use Cases: What Can You Actually Repair?

Smartphones

iPhone and Samsung Galaxy models use Pentalobe (Apple's proprietary format) and Phillips screws. The JAKEMY set covers iPhone models from the iPhone 5 through iPhone 15, including the Pentalobe P2 (bottom screws), P5 (older batteries), and P6 variants. Battery replacements, screen replacements, charging port repairs — all are within reach.

Android phones vary more widely. Most Samsungs use Phillips and Torx. Most budget Android phones from Chinese manufacturers use Phillips. The JAKEMY set covers essentially all of them.

Laptops

Laptops use mostly Phillips (most common), Torx (Dell, some Lenovo models), and occasionally Y-type or hex screws. The JAKEMY set handles all of these. RAM upgrades, SSD replacements, thermal paste replacement, keyboard swaps — these are the most common DIY laptop repairs, and the 145-piece set covers them all.

Gaming Consoles and Controllers

Nintendo hardware is notoriously proprietary in its screw choices: Tri-wing and Y-type screws for original Game Boy through Switch. The JAKEMY set includes both. PlayStation controllers use Phillips; Xbox controllers use Torx T8 Security. All covered.

For console internals (PS5, Xbox Series X): these use Torx security bits primarily. The set handles them.

Hobby Assembly: Model Kits and RC

For scale model kits, the flat-head bits and Phillips bits in the smaller sizes (M1.5, M2) handle the tiny fasteners found in 1:24 and 1:12 scale builds. RC car and drone assembly typically uses hex (Allen) bits in 1.5mm through 3mm — all included in the JAKEMY set.

Camera and Optics

Consumer cameras — DSLRs, mirrorless bodies, action cams — use small Phillips and Torx screws. The JAKEMY set covers the typical sizes for lens barrel disassembly (Phillips PH00, PH000) and body panels.

JAKEMY vs iFixit Pro Tech Toolkit

The iFixit Pro Tech Toolkit is the industry gold standard for electronics repair. It includes 64 precision bits, a spudger, tweezers, opening picks, and suction cups in a neat zippered case. At around $70 USD, it's a professional-grade kit designed for repair technicians.

Compared to the JAKEMY 145-in-1:

Bit quality: iFixit's precision bits have marginally tighter tolerances and a slightly better fit on proprietary screw types like Pentalobe. The difference is noticeable if you're doing intensive phone repair — for occasional home use, the JAKEMY bits are adequate.

Bit selection: JAKEMY wins on sheer count — 141 bits vs 64. The iFixit kit covers the most common repair types but you'll run into gaps on specialized hardware. The JAKEMY kit has more obscure types covered.

Accessories: iFixit includes case-opening tools (spudger, opening picks) that the JAKEMY doesn't. If you're opening plastic-latched phones, you'll need these separately (they're cheap on AliExpress — a few dollars for a plastic spudger set).

Price: JAKEMY is typically $15–25 on AliExpress vs $70+ for iFixit. For home DIY, the JAKEMY is the better value proposition. If you're doing repair professionally and need the absolute best bit fit, invest in iFixit.

JAKEMY vs ORIA Precision Screwdriver Set

ORIA is another popular brand on AliExpress in this category. The ORIA 60-in-1 and 76-in-1 sets are frequently compared to JAKEMY.

Bit selection: JAKEMY's 141-bit selection is significantly larger than ORIA's 60 or 76. For specialized hardware, JAKEMY wins.

Case design: Both use clamshell cases with labeled slots. JAKEMY's case is slightly more robust in our assessment — the bit retention in the slots is firmer.

Price: Both are in the $15–30 range depending on configuration and sale price. ORIA is occasionally a dollar or two cheaper on sale.

If you want a smaller, more portable kit and mostly do common repairs (phones, laptops), ORIA's 76-in-1 is a reasonable alternative. If you want comprehensive coverage and don't mind the larger case, JAKEMY's 145-in-1 is the better long-term buy.

Build Quality and Durability

The carry case is the weak point. It's functional but clearly the budget item in the set — the plastic hinge could fail with repeated heavy-handed opening, and the latch mechanism is plastic rather than metal. In practice, if you treat it like the tool kit it is (not a travel ruggedized case), it holds up fine.

The bits show no finish wear after typical use. The handle's rotating cap mechanism feels solid with no wobble. The rubberized grip shows no signs of peeling. For the price, build quality is solid.

What's Missing

The 145 pieces don't include case-opening tools — no spudger, no opening picks, no suction cup. These are essential for modern smartphones where the back glass or screen is glued. Purchase a plastic opening tool set separately — they cost about $3 on AliExpress.

Some users also note that the included bits don't include a magnetizer/demagnetizer. If you want to magnetize or demagnetize bits (useful if a bit becomes too strongly magnetized or you need to demagnetize for HDD work), that's a separate $2–5 tool.

Price and Where to Buy

On AliExpress, the JAKEMY 145-in-1 Precision Magnetic Screwdriver Set typically runs $15–25 depending on the seller and ongoing promotions. AliExpress prices fluctuate — check the current listing for flash deals and store coupons, which can bring the price down by $3–5. It's also available on Amazon, usually at a slightly higher price point. The JAKEMY brand also sells direct through its own AliExpress store, which is worth checking for the most reliable product authenticity.